Pcb Manufacturer Container Ship Tracking Boat Gps Tracker Container Vessel Tracking Track A Cargo Ship Shipment Vessel Tracking Pcb Assembly Board Manufacturer
Board Size: 130*189mm
Numbers of layer: 6 layers
Min Hole Diameter:0.5mm
Soldermask Color: Green
Board material: FR4
Copper Thickness:1 OZ
Silkscreen Color: White
Minimum circuit width and distance:
Minimum circuit width is 0.167mm,
Minimum circuit distance is 0.303mm
Surface Technics:immersion gold
Application area (specific)
Detection detect real-time information on operating position, direction and speed. Running track can be recorded and provides current operating speed, angle, and nearest port location. Real-time detection of the terrain, depth, angle and other distance between the cargo ship and the shore. The seconds or minutes after operating the ship will be displayed in the background screen.
1.The accurate positioning to accurately display the information about the operation and docking of the cargo ship.
2.Record the running track. Ability to accurately record the position where the ship had operated, and the operating direction and speed at the time. For facilitate maintenance of the vessel, identify the location for key maintenance.
3.Prejudgment function. After operating the operating ship, you can prioritize and show the trajectory of the ship for the next period of time. Can enable the driver to detect the operating errors in advance, and adjust in time.
4.Sensors can be installed at each angle of the vessel for detection. A number of sensors are installed at the stern and on both sides of the ship. When docked or away from the shore, the distance of the ship is directly displayed from the shore to facilitate the driver to operate the boat.
5.Higher waterproof grade. Because used in ships, will contact the highly corrosive seawater, the product waterproof grade of IP68, and the shell is made of high corrosion resistant material, can ensure the normal operation of the product.
1.Identify the location in real-time. The ability to locate the current location at sea in real time and is also shown in the background on shore. Accurate positioning and high accuracy.
2.Real-time display of the vessel operating speed, angle, and the location and distance of the nearest port. When operating at sea, the current operating speed, operating angle, and the nearest port to the current location, and distance.
3.Expected the movement of the ship for a period of time after its operation. The operation of the vessel has delay. Record and calculate the operation of the product, so as to adjust the wrong operation in time to ensure the safety of the vessel.
4.Train maps around the incoming port can be provided showing seabed depth. Relevant information can be searched and topographic maps around the harbour based to its location. Show the depth of the harbour coast to facilitate vessel entry and departure.
5.Stop or from the port shows the vessel at each angle from the shore. Position multiple sensors at different locations of the vessel to detect the distance from the shore. The product background shows the outline of the ship and shows the distance between the ship and the angle of the ship and the shore. Convenient to stop and sailing, to ensure the accuracy and safety.
1.This product has more large modules, after the furnace and after the furnace inspection, need to pay special attention, easy to occur tin climbing state is bad, need and other problems.
2.Chips more, the direction before welding needs to pay more attention to prevent chip welding reverse, resulting in product failure.
3.Due to the product is high waterproof and high corrosion resistance, so for the product assembly and packaging, we need to be strictly controlled, to ensure the product waterproof grade, corrosion resistance characteristics, etc. And the aging test needs to be done to test the product performance and service life.
4.There are many precision components, so the installation scheme should be considered in advance to make the smooth production.
5.This product has more functions and precision, for the product testing, it is more difficult, we need to do the test plan in advance, to test the whole aspects of the product function.
6.SMT nuts, requiring accurate positioning. Steel mesh needs to open the tin for SMT patch production.
7.Inductive capacitance of this product has large components, and the furnace temperature curve shall be adjusted before passing the furnace to prevent false welding and cold welding of such large components.
- CAN BUS INTERFACE
- DB9 RS485 The external interface
- RS485 Signal isolation interface
- 3G Wireless communication module
- GPS/BDS External interface of the module
- STM32F439 MAIN CONTROL CHIP Cortex-M7@180MHz
- Onebox Cable controls the moving module