Track Your Car Anywhere with Our Premium GPS Tracker – Made in China, Enhanced for Your Trailer!

GPS tracker Selling Points

The product has powerful function and compact size.Built in a variety of modules, can be the vehicle position, running state all-round monitoring, and small size, will not take up too much space.

No need for external network, the onboard person can grasp the vehicle information in real time.Using Bluetooth communication protocol and mobile APP, the onboard person can also monitor the vehicle information in real time in the environment with poor network.

Data retention capabilities.The overall design adopts low power consumption, adding 128M built-in storage, which can still save important data in the case of insufficient battery output voltage.

Linear accelerometer navigation, regardless of terrain.Adding LIS3DHTR linear acceleration sensor, in the case of poor GPS signal, the acceleration sensor can also be used to navigate according to the algorithm.

Multiple kinds of external interfaces.IIC protocol, CAN bus protocol, SPI communication protocol, RS232/RS485 serial port protocol external interface and multiple GPIO ports are added to improve the compatibility of the equipment.

By using the temperature sensor, the device can monitor and upload container temperature in real-time to the APP. If any issues arise, users can utilize their mobile phones to issue temperature control instructions to the MUC.

The device allows for real-time data uploading and cloud background services, thanks to the use of the U-Box SAPA-U201 GSM/GPRS module. The device packages and uploads monitoring data to the cloud platform for big data analysis in the background.

GPS tracker difficulties

The board is 6 layer double-sided circuit board with dense components and high maintenance difficulty.

The product contains multiple chips with built-in pins (such as U2 and U20). During the production, it is necessary to ensure the tin climbing state of the chip pins

The product needs to be burned and tested. In order to reduce the adverse risk of operation and production efficiency, need to be made fixture to guarantee it.

During the assembly module U5, there is the phenomenon of virtual welding. The steel mesh is optimized for this component.

When designing the panel, it is important to control the quantity and production capacity of the machine due to the presence of multiple MiniBGA for the product.

The device offers container temperature monitoring and control functionality, utilizing either a serial port or Bluetooth external temperature sensor to accurately maintain the container environment.

Real-time monitoring of vehicle status.Tire pressure monitoring, ABS status, light status, generator fuel level monitoring, at any time to master the status of the vehicle.

The device monitors and logs driving paths and vehicle statuses, recording and saving previous data for future reference.The GPRS module allows the device to send recorded data to the background, functioning similarly to the “black box” on an airplane.

Precise positioning and navigation.Adopt GPS/GLONASS dual positioning, and configure linear acceleration sensor, even if GPS positioning failure, also can provide excellent navigation service.

The device offers a range of external extension interfaces, allowing users to add multiple peripherals such as emergency buttons, microphones, and speakers.

GSM/GPRS  communication module

The external port:Contains GPIO, SPI, I2C, and I2S communication interface

GPS+GLONASS navigation module

Bluetooth transmission control chip

Step-down chip

Charge management chipv

GPS tracker

1. GSM/GPRS Ceramic antenna
2. SIM card slot
3. STM32 maincontrol chip
4. Linear acceleration sensor
5.  128M Flash storagechip
6. GAN bus external interface
7.  512K running memory
8. Power interface
9.  GPS/GLONASS Ceramic antenna